I’m not saying this is THE way. But if you struggle with rollers, this post on how to paint walls using a brush may give you a viable (or preferable!) alternative!

Rob and I are deep in the throes of home improvement. Remember last year when we renovated our kitchen? And then got the foundation and pipes fixed?  (Read: remember when we dropped a huge chunk of change as part of the joy of home ownership?)

We are FINALLY putting the finishing touches on. We have a windowsill! And a light for above the kitchen sink! Full photos to follow. For now I am entrenched in painting two whole rooms. Sometimes people act like I’m nuts when I say that I paint my own walls. I think it’s crazy to pay someone, unless you have gajillions of dollars. But since this is unfamiliar to most people, I’m going to share some tips and tricks for how to paint walls using a brush (instead of a roller). 

I know that rollers are fast and get a lot of coverage. But when I use them, I make a giant mess (even more than usual), waste a lot of paint, and end up having to go back with a brush anyway. Though it should save me time, it instead wastes my time. In case you want to try your hand at painting a room in  your house and are scared of the roller, here is a quick video tutorial and then a few tips for how to paint walls using a brush.

 Tips and Tricks for Painting Walls with a Brush

Get brushes that won’t fall apart.
I don’t buy the high-end brushes, but not the cheapest either. I find that the brushes at home improvement stores somewhere in the middle price range tend to work well without leaving tons of bristles embedded in the walls. I don’t ever spend more than $5 on a brush. That way if the paint ends up not cleaning off well from the bristles, I can just throw it away at the end of a project without guilt. I almost always buy new brushes when painting a new room.

Here are brushes similar to the ones that I use! 

Prep Well.
I try to do as few steps as possible. I am messy, but can usually paint without a tarp down. I keep a wet rag and any stray drips get wiped quickly, especially from something like grout. If I’m painting on tile or wood, the best option if you miss a spot is to leave it, let it fully dry, and easily pick it off. If it’s a thin little streak, definitely try to get it while wet. But big, thick drips or drops are easy to peel off. I try not to ever prime and have found that unless I’m painting a much lighter color on top of a darker one, I can get away without priming. It’s all in the amount of coverage you do in each layer.

Don’t overload the brush with paint. As you see in the video, I only dip the brush about an inch or two into the paint. Then I wipe the bottom side of the brush so I really only have paint on one side. I want a good deal of paint, but I want it on the wall, not trapped in the bristles. Rollers trap a TON of paint and I have found that I use almost twice as much paint using a roller. Paint is money, so I want to use less. Always.

Don’t dry brush.
Though I only get an inch or two of paint on my brush, I try to transfer all of that immediately to the wall. Rather than pressing really hard and spreading it as far as I can, I push the paint around on the wall, usually only five or six strokes, before I’m ready to dip again. This means a lot of moving back and forth from the wall to the paint can, but it gives you a nice, thick coverage without wasting paint. If you keep painting until the brush is dry, you end up with a thin layer of paint on the wall and you will certainly need a second coat. I try to do only ONE coat (with some touch-ups, of course) per room. Typically with this method, I can accomplish this. The exception being when you are making an extreme change or using a color like red that is often a bit more translucent.

Fix mistakes later.
Touch-ups should come later, not as you go. I’ve made the mistake before of trying to fix something while the paint is not fully dry and what happens is a sticky mess on the wall, leaving a sort of textured and icky area that you might need to sand down. Wait until things are fully dry and then look for areas that need help. THIS is when you can use a dry brush and less paint. Because there is already a layer, if you find an area that is thinner, using that little bit of paint left on the brush after you do my normal full coverage works well. Then you really are using every bit of paint.

Cut-in at a different time from when you fill the walls.
Cutting-in is the process by which you get the edges at the top and bottom or near the trim. It takes more precision and time. I find that I make more of a mess when I tape things off for some reason, so I never use painter’s tape. Instead I will either start by doing all of this precision work with a slow or steady hand or will finish the job with this part. I am often impatient to see results, so this tends to fall to the end. If I am cutting-in at the same time that I’m covering huge expanses of wall, I tend to be less focused and make more mistakes. If you want to see a great tutorial on cutting-in, check out this post from Young House Love.

Find your OWN painting tips. You may find your own method as you get used to painting. I have painted every room in our house, some of them three or four times. We have lived in our house seven years. I am insane and like change a lot. This is my tried-and-true method after all those years and rooms of painting. The more you get used to it, the more you’ll find what works for you!

Do you ever paint your walls? Any of your own tips and tricks? Let me know if you’re Team Brush or Team Roller in the comments!

Roller vs. Brush

Most interior paints available on the market today can be applied by a paintbrush or a paint roller and we use both in our projects, depending on the wall texture and the effects we want to achieve.

However, if you’re considering DIY paint job, it’s important to know that a brush and a roller have two very different functions.

Selecting the right tools is an essential step in making your paint job look better, and be more efficient – here are a few facts to help you decide which paint tool to use:

Brush

The oldest and most popular tool to use for painting because it’s small, precise and flexible, which makes it perfect for painting details, edges and areas that require more attention.

The brush is typically used to cut in and out of smaller and more detailed areas, including trims, corners, and edges, and to create a textured effect with brushstrokes.

There are various sizes and types of brushes to choose from: narrow brush to paint joints and alcoves, wide brush for edges and larger surfaces, and ‘radiator brush’ for corners; medium hardness brush is used to cover corners, while soft angle brush is best for details.

Also, depending on the type of paint, different brushes are used: nylon or polyester for latex (water-based) paints, and natural for oil-based paints, varnishes, and stains.

However, it’s important to know that painting with brushes is not economical since you need more paint; so, we wouldn’t’ recommend painting with the brush on large and smooth areas, as the incorrect use of a brush can cause streaks and traces.

Roller

Roller provides thin, uniform and even coats, and is an ideal tool for painting large, smooth and well-prepared walls, ceilings, and large furniture.  The roller is more economical to use than the brush since its porous surface holds much more paint and distributes an even layer of paint much faster.

The smoother the wall, the shorter the filament length should be (approx. 10mm), but in general it’s better to take advantage of a roller with longer filament.  You can achieve different finishes with different rollers: smooth surface rollers for smooth finish, and thick or fluffy surface rollers for a more textured finish.  There are many available roller types: plastic ones are intended for water-based paints, natural fiber ones for solvent-based paints, and sponge rollers for oil-based paints.

The most efficient technique when painting with a roll is ‘V letter’ – it allows you to cover large surfaces uniformly and quickly.  To prevent unaesthetic streaks, do not press the roller too firmly against the surface.

Benefits of Using Both

The best painting results will be achieved by using the mixed technique – start with painting the corners, difficult-to-reach areas and edges with the brush, and then cover larger surfaces with the roller.  This method is more efficient and will save you time, plus you’ll end up using less amount of paint.

Whichever painting tools you are using, it’s necessary to wash them with water after completion of the project.  You can use them again after they have dried.

Whether you need major remodeling or you want to revamp your walls, at Home One Service we are here to help enhance the look and feel, comfort and safety of your home.

Rest assured our proficient and friendly team of contractors at Home One Services is here for all your home and office improvements and maintenance needs, including quality home painting and commercial painting in Lancaster PA.