The main structure and performance of electric turning nursing bed

Electric turning multi-functional nursing bed can help patients roll up, stretch their lower limbs and complete defecation by themselves. It is suitable for self-nursing rehabilitation of all kinds of bed-bound patients, and can reduce the nursing intensity of medical staff. It is a new multi-functional nursing device.

Main structure and performance

1) Electric roll over: the bed is equipped with a pile of roll over frame components on the left and right side of the bed, and after the motor is run, the slow speed transmission can make the roll over frame slowly rise and fall. The roll over frame is provided with a roll over belt, and the human body can complete the rollover action at any Angle within the range of 0°~80° by relying on the roll over belt, so as to change the body pressure parts and provide the best posture for care and treatment.

2) Electric rise: under the bed plate, a pair of rise arms are provided. After the motor runs, the rise shaft is driven to rotate, so that the arms at both ends of the shaft can do arc movement, and the bed plate can be lifted up and down freely within the range of 0°~80° to help the patient complete the sitting activity.

3) Electrically assisted lower limb extension and flexion: a pair of extensional folding pads are fixed on the left and right of the lower bed plate, and the lower end is equipped with a pair of sliding roller wheels, which can make the folding pad stretch and bend, flexible and lightweight. After the motor is run, the extension shaft is driven to rotate, so that the wire rope fixed on the shaft can be rolled up with the tension spring, driving the arc lifting rod to rise or fall, and completing the extension and flexion of the lower limbs of the employer. It can be arbitrarily stopped and started in the height range of 0~280 mm to meet the purpose of exercising and restoring the function of the lower limbs.

4) Toilet structure: there is a long round hole at the bottom of the bed plate, equipped with a cover plate, the cover plate is inlaid with a pull belt, the cover plate is provided with a toilet bucket, the track welded on the bed plate frame will be closely combined with the toilet bucket hole and the cover plate on the bed plate, patients can control the electric leg button to get up, and adjust the position, pull open the cover plate, to complete the bed urination process.

5) Active table: there is a sensational table in the middle of the bed end frame, usually the table and the bed end become one, when pulled up the table, patients can use electric power to get up, after sitting up to write, read, eat and other activities.