#Regarding the problem that #putty powder is easy to powder, or the strength is not up to anything. It is known that #cellulose ether needs to be added to make putty powder, and many users do not add redispersible latex powder. Many people do not add rubber powder to save costs, but this is also the key to why ordinary putty is easy to powder and product quality problems are prone to occur!
Ordinary putty (such as 821 putty) is mainly made of white powder, a little starch glue and #CMC (hydroxymethyl cellulose), and some are made of methyl cellulose and double fly powder. This type of putty has no adhesion and is not water resistant.
#Cellulose and water can absorb water and swell after dissolving. Different manufacturers' products have different water absorption rates. Cellulose plays a role in retaining water in the putty. The dried putty only has a certain strength temporarily, but it will slowly depowder after a long time. This is closely related to the molecular structure of cellulose itself. Such putty is loose, high water absorption, easy to pulverize, no strength, no elasticity. If the topcoat is applied on it, low PVC is easy to burst and foam; high PVC is easy to shrink and crack; due to its high water absorption, it will affect the film formation and construction effect of the topcoat.
If you want to improve the above problems of putty, you can adjust the putty formula, add some redispersible latex powder appropriately to improve the late strength of the putty, and choose a high-quality hydroxypropyl methylcellulose HPMC with quality assurance. Shanghai Rongou Chemical Co., Ltd. The company's #hydroxypropyl methylcellulose has the excellent water retention rate of high-quality cellulose, which can fully hydrate the putty raw materials and improve the quality of the putty.
In the production process of putty, if the amount of #redispersible latex powder added is not enough, or the inferior special latex powder for putty is used, what impact will it have on the putty powder?
If you are looking for more details, kindly visit henggu jianxin.
Insufficient amount of putty redispersible latex powder, the most direct manifestation is that the putty layer is loose, the surface is chalked, the paint consumption is large when painting the top coat, the leveling is poor, the surface is rough after film formation, and it is difficult to form a dense paint film. Such walls are prone to peeling, blistering, shedding, and cracking of the paint film. If you choose low-quality putty powder, it is obvious that harmful gases such as formaldehyde generated on the wall will cause physical damage to others.
If you want to change the status quo, you must remove all the inferior putty without leaving any residue, and then buy qualified putty and latex paint! In order to avoid unnecessary losses, customers try their best to choose products of big brands and quality assurance in the convenience of putty selection.
If you are interested in our products, you can choose to leave your information here, and we will be in touch with you shortly.
Want more information on rdp vae powder used in wall putty? Feel free to contact us.